keyword : Product Category :
Level meter
  • 1.electrical relay capacity:DPDT, rating10A,115VA.c or 5A,22VA.C
    2.Timelag: 0-30 seconds continuous adjusting
    3.Power: 220VA.C or 24VD.C
    4.Sensitivity: 0.5pF
    5.Material temperature: -184ºC-260 ºC
  • 1.connection: 1 "NPT thread / flange (two ways)
    2.supply voltage: 24 V DC; 220V AC 50Hz
    3.shell protection: IP65
    4.temperature range: -30 ° C to 150 °C
    5.measured medium: liquid, powder or granular solid
  • 1.medium: liquid, powder or granular solid
    2.fork material: 1Cr18Ni9Ti
    3.connection: 1 "NPT thread / flange
    4.supply voltage: 24 V DC; 220V AC 50Hz
    5.medium temperature range: -20 ° C to 220 °C
  • 1.medium: liquid, powder or granular solid
    2.fork material: 1Cr18Ni9Ti
    3.connection: 1 "NPT thread / flange
    4.supply voltage: 24 V DC; 220V AC 50Hz
    5.medium temperature range: -20 ° C to 220 °C
  • ALC6000 transmitter series are used in continuous measurement of RF capacitive material level. This capacitive level transmitter is widely applied almost all kinds of industry. Measurement detector and vessel make up a capacitor. The change of material le
  • Magnetostrictive sensor is designed by which is based on the magnetostriction machanism, it consists of waveguide wire , waveguide chamber, movable magnets and electro-parts which make application for emitting electric pulse signals and accepting return
  • 1.Measuring range : L ≤ 6000 mm
    2.Medium temperature : ≤ 120 ℃
    3.Vessel flange : DN80 ~ DN150
    4.Pressure Rating : 0.6 ~ 2.5MPa
    5.Output signal :4-20mA
firstprevious12nextlast